Fixing a crank window that won’t close can be a frustrating task, but with a little patience and some basic tools, it is possible to do it yourself. Here are the steps to follow:
Step 1: Check the Window Alignment The first step in fixing a crank window that won’t close is to check the alignment of the window. If the window is not aligned properly, it may not be able to close properly. Check to see if the window is sitting squarely in the frame. If the window is not properly aligned, you can try adjusting the hinges or the tracks to get it back into place.
Step 2: Check the Window Mechanism If the window is properly aligned, the next step is to check the window mechanism. Start by examining the crank mechanism. Check for any obvious signs of damage or wear and tear, such as broken or missing parts. If you notice any problems with the mechanism, you may need to replace it.
Step 3: Tighten Loose Screws and Bolts If the window mechanism looks fine, the next step is to check for loose screws and bolts. Over time, the screws and bolts that hold the window in place can become loose, which can cause the window to not close properly. Check all of the screws and bolts on the window and frame and tighten them as needed.
Step 4: Lubricate the Window Tracks If the window still won’t close after checking the alignment and mechanism and tightening any loose screws and bolts, the problem may be due to the window tracks. Over time, the tracks can become dirty and clogged with debris, which can prevent the window from sliding smoothly. Use a silicone-based lubricant to lubricate the tracks and help the window slide more easily.
Step 5: Check the Window Seal If the window still won’t close after lubricating the tracks, the problem may be due to a faulty window seal. Check the seal around the window to make sure it is intact and not damaged. If the seal is damage, it will need to replace.
Step 6: Replace the Window Mechanism If none of the above steps have resolved the problem. The window mechanism may need to replace. You can purchase replacement parts from your local hardware store or online. To replace the mechanism, start by removing the old mechanism from the window. Follow the manufacturer’s instructions for installing the new mechanism, and test the window to make sure it closes properly.
Step 7: Call a Professional If you are still having trouble getting your crank window to close. It may be time to call in a professional. A professional window repair company can diagnose the problem and recommend the best course of action. They can also provide you with an estimate for the cost of repairs.
Tips to Avoid Future Problems With Your Crank Window To avoid future problems with your crank window, here are some tips to keep in mind:
Regularly clean and lubricate the window tracks to prevent them from becoming clogged with debris.
Inspect the window seal periodically to make sure it is intact and not damaged.
Avoid using excessive force when opening or closing the window, as this can damage the mechanism.
If you notice any problems with your window. Such as difficulty opening or closing, address them promptly to prevent them from getting worse.
In conclusion, fixing a crank window that won’t close can be a bit of a challenge. But with the right tools and some patience, it is possible to do it yourself. Start by checking the alignment of the window, then move on to examining the mechanism. Tightening loose screws and bolts, lubricating the tracks, checking the seal, and finally replacing the mechanism if necessary. By following these steps and taking care of your window, you can avoid future problems and ensure that it functions