Installing Firestone metal wall panels is a great way to add a modern and stylish look to your home or commercial building. The installation process may seem intimidating, but with the right tools and knowledge, it can be done easily and efficiently. Here’s a step-by-step guide on how to install Firestone metal wall panels.
Prepare the Wall Surface
Before installing the metal wall panels, it’s essential to ensure that the wall surface is flat, even, and free of any debris. If the wall has any protrusions, you can use a grinder to smooth them out. If the wall is uneven, you can install furring strips to make it even.
Measure the Wall
Measure the length and height of the wall where you plan to install the metal wall panels. Add an extra two inches to the length to allow for overlapping. commercial building
Cut the Metal Wall Panels
Using a metal saw or cutting wheel, cut the metal wall panels according to the measurements you took in step 2. Make sure to wear protective gloves and eyewear when cutting the panels.
Install the Starter Strip
Start by installing a starter strip at the bottom of the wall. The starter strip is a long strip of metal that provides a flat surface for the first panel to rest on. Screw the starter strip onto the wall using metal screws.
Install the Metal Wall Panels
Start by placing the first panel onto the starter strip. Make sure that it’s level and flush against the wall. Screw the panel into the wall using metal screws. Continue installing the metal wall panels, making sure that each panel overlaps the previous one by two inches. Use metal screws to secure each panel in place.
Cut Around Obstacles
If there are any obstacles on the wall, such as windows or vents, you’ll need to cut the metal wall panels to fit around them. Measure and mark the panel where it needs to be cut. Use a metal saw or cutting wheel to cut the panel to the correct size and shape.
Install J-Channel
If you’re installing metal wall panels on an outside corner, you’ll need to install J-channel. J-channel is a piece of metal that is shaped like a “J” and is used to cover the edges of the metal wall panels. Screw the J-channel onto the corner of the wall, making sure that it’s level and flush with the wall.
Install Trim Pieces
Once all the metal wall panels are installed, you’ll need to install the trim pieces. Trim pieces are used to cover the edges of the metal wall panels and give the wall a finished look. Install trim pieces around the edges of the wall and any openings, such as windows and doors.
Seal the Wall
To prevent water from seeping behind the metal wall panels, it’s essential to seal the wall. Apply a silicone sealant around the edges of the metal wall panels and any openings, such as windows and doors.
Inspect the Wall
Once you’ve finished installing the metal wall panels, inspect the wall to ensure that everything is level, flush, and sealed properly. Make any necessary adjustments or repairs.
In conclusion, installing Firestone metal wall panels is an excellent way to give your home or commercial building a modern and stylish look. By following these ten steps, you can easily and efficiently install metal wall panels and transform your space.