White arched kitchen cabinets are a classic and elegant choice for a kitchen remodel. They can add a touch of sophistication to any kitchen design, and their arched shape adds an interesting visual element to the room. Installing white arched kitchen cabinets requires careful planning and attention to detail to ensure that the cabinets are level, secure, and look their best. Here’s how to install white arched kitchen cabinets.
Measure and Plan
Before beginning the installation, measure the space where the cabinets will be installed and create a plan for the layout. Consider the height and width of the cabinets, as well as the placement of appliances, countertops, and other kitchen features. This will help ensure that the cabinets are installed in the right location and are level and secure.
Remove Old Cabinets
If there are old cabinets in the kitchen that need to be removed, start by disconnecting any plumbing or electrical connections. Remove the cabinets one by one, being careful not to damage the walls or any other fixtures in the kitchen.
Install Upper Cabinets
Start by installing the upper cabinets first. Use a stud finder to locate the wall studs and mark their locations. Then, use a level to draw a straight line along the wall where the bottom of the cabinets will be. This will serve as a guide for the installation.
Next, attach a temporary support board along the line using screws. This will help support the cabinets during installation. Begin with the corner cabinet and work outward. Install each cabinet by screwing it into the wall studs using 3-inch cabinet screws.
Install Lower Cabinets
Once the upper cabinets are installed, move on to the lower cabinets. Again, use a stud finder to locate the wall studs and mark their locations. Then, use a level to draw a straight line along the wall where the top of the cabinets will be.
Attach a temporary support board along the line using screws. This will help support the cabinets during installation. Begin with the corner cabinet and work outward. Install each cabinet by screwing it into the wall studs using 3-inch cabinet screws.
Add Trim and Molding
Once the cabinets are installed, add trim and molding to give them a finished look. Install crown molding along the top of the upper cabinets and above the range hood. Install base molding along the bottom of the lower cabinets. Use a miter saw to cut the molding to the right size and shape, and attach it to the cabinets using a finish nailer.
Install Hardware
Finally, install the hardware such as handles, knobs, and pulls. Choose hardware that complements the style of the cabinets and the kitchen design. Use a drill to make holes for the hardware, and attach the hardware using screws.
Tips for a Successful Installation:
- Always use a level to ensure that the cabinets are straight and level during installation.
- Use a stud finder to locate the wall studs and attach the cabinets to the studs using 3-inch cabinet screws for added security.
- Make sure that the cabinets are flush against the wall and each other to avoid gaps or unevenness.
- Use shims to level the cabinets if necessary.
- Be sure to use a finish nailer to attach molding and trim to the cabinets for a professional finish.
- Double-check that all hardware is attached securely and evenly.
In conclusion, installing white arched kitchen cabinets can be a challenging task, but with careful planning and attention to detail, it is achievable. By following these steps, you can ensure that your cabinets are level, secure, and look their best. With their classic and elegant style, white arched kitchen cabinets can be a beautiful addition to any kitchen remodel.